CMM fixture features
1: three coordinate measuring instrument working platform that the marble platform, in the measurement table is not fully measured, you need to use some of the specific fixture (currently used a vise) to finish the measurement, because the fixture repeated on the platform Friction, over time, CMM Holding Fixture for Stamping Parts will cause wear on the surface of the platform. CMM fixture is the main part of the installation of flat, you can fully protect the marble platform accuracy, to extend its service life.
2: CMM fixture as long as through some simple combination, you can achieve a variety of products and more complex product clamping, users can save those special fixture production funds, CMM Holding Fixture for Stamping Parts better save production costs.
3: can be more accurate to repeat the positioning, we installed the board of each hole and fixture components are code, each clamping method can use these code to make a recorded word for the next (or need to repeat the measurement And batch measurement) to measure the same product for reference, only need to follow the previous record to those fixture components installed on the installation plate, clip the product, CMM Holding Fixture for Stamping Parts you can achieve the measurement. In particular, during the process of sampling and shipment batch inspection, mold modification, process capability research (CPK), measurement system analysis (MSA), it is possible to minimize the clamping time and improve the efficiency of the user; CMM Holding Fixture for Stamping Parts and Provide a reliable way to clamp, to minimize the measurement error, for accurate measurement data.