Three-coordinate measuring fixture referred to as three coordinate fixture, also known as three-coordinate universal fixture or three-coordinate flexible fixture, three-coordinate measuring instrument is the use of modular support fixture and its reference device, the measured parts are flexible fixed. CMM Holding Fixtures The use of three-coordinate measuring fixture can fix and clamp the parts of any complex surface to minimize the error of measurement and ensure the accuracy of measurement.
It is well known that it is not possible to measure directly on the three-coordinate working platform, it is necessary to use some specific three coordinate measuring fixture to complete the measurement work, because the three coordinate fixture is a clamping plate, so as to avoid the fixture on the platform repeatedly friction, CMM Holding Fixtures can play the protection of three coordinate measuring instrument work platform function, The use of three-coordinate measuring fixture can also prolong the service life of the machine. In the work, as long as the fixture through the changing combination, you can achieve a three-coordinate measuring instrument in the measurement of a variety of fixture needs.
So what is the use of the three coordinate measuring fixture? Let's take a quick look below. To determine the bottom shape of the part being tested, to select the specific model of the fixture, after which the workpiece will be tested to support the floor, and then to select some to tighten the fixture, the fixture selection also depends on the side shape of the part, so that it is tightly fixed on the floor, in order to improve the accuracy of the detection machine work.
In fact, the installation of each hole and fixture has a code, we can put them any combination of the code to write down, the next time we repeat the measurement of products, as long as the record fixture components installed on the platform, CMM Holding Fixtures and then on the clip to be measured parts.
Nowadays, with the continuous progress of science and technology, people have more and more precise requirements for the parts of machinery production. In fact, CMM Holding Fixtures the accuracy of the test results from the measurement instrument itself performance and measurement methods, more inseparable from the use of three coordinate measuring fixture. Si-Rui three coordinate measuring instrument each component is rigorously inspected to ensure a higher accuracy.