Stamping Parts Checking Fixture

BMW G21 Project Attribute Automotive Parts inspect tool / Main Material for Al

Manufacturing tolerance:

1.The Flatness of Base Plate 0.05/1000

2.The Thickness of Base Plate ±0.03mm

3.The Location Datum ±0.02mm

4.The Surface ±0.1mm

5.The Checking Pins and Holes ±0.1mm

Quality Control

CMM (3D Coordinate Measuring Machine), Vms-2515G 2D Projector, HR-150 A Hardness Tester

CONNECTING SYSTEM OF C/F

Size of sleeve must meet following:

Hole diameter: 8 mm

Outer diameter:20÷25 mm

Hight of ring 3 mm

Chamfer max 0,3x45°

Plate attachement Allen screw M3

See more - Appendix 5 and 6

That is OK. Clamps are inside of shape of base plate.

Connecting system of C/F must be designed with connecting sleeves made from corrosion resistance material.Each connecting sleeve must have plate with coordinates from global positioning sytem of car.

In case of common C/F for left and right side must be connecting sleeves clearly marked for each part. Plate must be made from corrosion resistance material.If this system is not suitable for design of C/F, it will be specified by customer individually.

QMF-KV045Checking fixture MCT's requirements Issue: 5

Clamping system must not exceed shape of base plate of C/F, design must be to this requirement adapted.

Non suitable design. Clamps exceed shape of base plate, risk of damage of C/F or risk of injuries.

Primary Competitive Advantages

Pursuit Of Quality Excellence

Multiple Products & Services

Efficiency Consciousness-On-Time Delivery

Cost Consciousness-Innovative Design Solutions To Reduce The Cost

Timely Communication With Our Customer

Compliance With Cooperator’s Terms And Conditions

NDA(Non-disclosure Agreement)

Our purpose is that we can only succeed if our customers succeed.

Our production detail